Recent posts
Show more
stepper motors
Small Gears Bind Only at One Rotational Angle: Stepper Periodic Error Diagnosis
A gear that binds at one angle is not being dramatic; it is giving you a cl…
Read more
support settings
Bridging Fails Only on PETG Over PETG Supports: Interface Temp Mismatch
That ugly PETG bridge sagging over its own supports is not bad luck; it is …
Read more
thin walls
Arachne vs Classic Perimeter Generator: When Arachne Breaks Thin Walls
Thin walls are where a slicer stops being software and starts acting like a f…
Read more
Social Plugin